Tie-Wrapping Hem

Suggested Installation Instructions

  1. Unroll the fabric along the fence line. Double fold the vertical edge of the fabric to create a 2" hem. Position the fabric at the desired height, aligning the edge over the tension bar.
  2. Starting at the top corner, secure the fabric along the vertical edge with tie-wraps at 6" intervals. Insert the tie-wraps through the hem (approximately 1" from the edge) and around the tension bar.
  3. Attach the top length of the fabric along the fence line, inserting tie-wraps through the knitted reinforcement strip at 12" intervals to either the top rail or the chain link.
  4. Pull the fabric tight and attach along the bottom using the same procedure in step 3.
  5. Complete the installation by trimming the fabric and attaching the remaining end to the tension bar following instructions in Step 2.
Finished Tie-Wrapping
Back